澳洲10冷热号统计

澳洲10龙虎开奖结果

澳洲10开奖网

How do I install a mirror in my new bathroom? I just moved into a new home and want to make sure it sticks properly. Any suggestions so I do it right?

澳洲10在线走势图

Choosing the right adhesive is critical for a mirror installation. The silver backing on the back side of your mirror is extremely sensitive to adhesives. Some adhesives can burn through the silver backing, and damage your mirror. We recommend using LIQUID NAILS® Mirror Adhesive (LN-930).
 

澳洲10走势软件

After you choose your mirror-friendly adhesive, measure your mirror. If you mirror is over 2’ x 2’, make sure there is a base or lip for the mirror to sit on at the bottom of the mirror. Mirrors 2’ x 2’ and over must have physical fasteners like mirror clips, or L or J hooks so the adhesive cures properly.

澳洲10开奖走势

Apply a 1/4-inch continuous line of adhesive (bead) every 4 to 6 inches across the back of the mirror vertically. This allows air flow behind the mirror so moisture does not get trapped. Do not seal around the edges.

澳洲10开奖结果计划

Press your mirror into position.  Allow 24- 48 hours for your mirror to cure.
 
Following these steps will help you finish your mirror project.
 
IMPORTANT NOTE: Do not seal around edges.
   
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.